Rolling gates and covers are intended for installation in garages, shopping centers, production rooms, warehouses, gazebos and utility rooms. Due to their specific design, roller gates and covers fit perfectly into rooms where engineering lines (water supply, electrical installation, etc.) are an obstacle or where the door cannot be mounted to the ceiling. Installation of a roller shutter or cover is possible above the opening, as well as in the opening from the outside or inside the room. The armor is made of aluminum profiles filled with CFC-free polyurethane foam. The profiles with a height of 52 mm, 55 mm and 77 mm allow for optimal adjustment of technical parameters and price to the needs resulting from the intended use. A chamber rubber seal adhering to the base is installed in the bottom panel of the profile.
The armor makes a vertical movement along the aluminum guides equipped with brush seals, winding on the shaft, which is moved by an integrated tubular drive. All the above-mentioned elements are covered with an aesthetic box with a classic finish, where one of the corners of the box is cut at an angle of 45 degrees.
A wide range of color solutions ensures the connection of rolling doors with the facade of the building, and several assembly options will ensure a solution to difficult assembly situations.