Double Leaf Steel Sectional Doors​

You are here:

Double Leaf Steel Sectional Doors​

These gates have a wide range of applications due to their high thermal and acoustic insulation. The gates are made of panels covered with galvanized steel sheet, coated, filled with polyurethane foam. The total thickness of the panel is 40 mm. All construction elements are protected against corrosion.

The leaf is made of TL 610 and TL 500 panels. Different panel heights are used depending on the door height. The panels are coated with polyester paints. The leaf is filled with a 40 mm thick gate panel. The gate opens only outside the room.

The door can be opened even to 180 ° (after removing the stop). The passive left wing (looking from the outside). The right active leaf has a lock with an insert, a handle and a top and bottom bolt. As a standard, this gate has symmetrically divided wings. After prior consultation, it is possible to make the wings in an asymmetric division.

Embossing available

Without embossing

Single embossing

Panel embossing

Colors available

White RAL 9016
(woodgrain)

Silver RAL 9006
(woodgrain)

Brown RAL 8017
(woodgrain)

Brown RAL 8014
(woodgrain)

Red RAL 3000
(woodgrain)

Anthracite RAL 7016
(woodgrain)

Anthracite RAL 7017
(sand imitation)

Anthracite RAL 7016
(smooth)

Golden Oak
(smooth)

Walnut
(smooth)

Swamp Oak
(smooth)

Winchester
(smooth)